CANON IMAGERUNNER IR5000 DRIVER

If lines of 32 dots wide are found, the board is normal; otherwise, the board is faulty. OFF warning not issued; default , 1: SVR3 Detects the level of paper in the cassette 4. A zero level check may be made in either of two ways, so as to find out whether a circuit on the the DC controller PCB or the potential measurement circuit is normal: Checking the Environment Sensor 9. See steps 1 through 4 used to the motor. Range of 1 to 9 default:

Uploader: Malak
Date Added: 9 April 2010
File Size: 60.59 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 45530
Price: Free* [*Free Regsitration Required]

CL3 Drives the manual feed pickup roller. Or, draw a line on the support plate so that it will serve as a reference when positioning the solenoid. Photosensitive drum Check the following, and replace them if necessary.

imageRUNNER iR5000, iR6000 Service Handbook

Do not touch them in the field. Be sure not to touch the potential senor assembly after turning on the power switch. In non-auto control mode, all control settings corona current, intensity, developing bias will automatically be set to the standard settings stored in the ROM. Generate one print of a halftone image.

  DELL DS-8W1P 07C DRIVER DOWNLOAD

However, the environment of the user network may be faulty. Separation claw, fixing assembly inlet guide Clean with solvent and lint-free paper. Is the halftone density optimum? CL Use it to select the clutch to check.

Image with large background to check for fogging 2. MF-A4 Use it to enter the paper imgaerunner basic value A4 for the manual feed tray. F [1] [2][3] [4] [5] [8] [7] [7] [6]. OFF warning not issued; default1: OFF accepts input of original size from control panel; default 1: Be respectful, keep it civil and stay on topic. PC Connectivity Connection Availability.

Canon imageRUNNER – multifunction printer (B/W) Overview – CNET

The delivery motor M2 is faulty. Mode of Detection In msec after the laser drive signal has been generated, the BD signal is not detected 50 times or more within 40 msecs. Mode of Detection The clock pulses do not arrive for 2 secs or more after the drum motor drive signal DMFG has been generated. Copying Max Copying Speed.

  FUJIFILM FINEPIX A345 USB DRIVER

CK 20g Tool No. SL6 Drives the right deck pickup mechanism. ADJ-X Use it to adjust the scanner image leading edge position.

The laser unit is faulty. SL8 Drives the reversing flapper. Generate a blank print. The remote diagnostic device PCB is faulty.

Mode of Detection The main controller PCB has detected an error in control data while an image was transmitted between the main imagsrunner PCB and the hard disk drive. Settings to default: Using the Mode 1 Select the item mode, and press the OK key.

Headphones by David Carnoy Dec 17, Caution Use it on a hard disk found to have a problem. Covert the indication during printing V into a control voltage with reference to 8.